Numerical Control Programmer Interview Preparation Guide
Download PDF
Add New Question

67 Numerical Control Programmer Questions and Answers:

1 :: What have you learned from mistakes on this job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
Post Your Answer

2 :: If you had enough money to retire would you?

Just be honest. If you would retire then say so. But since you can't retire, and the interviewer already knows this, simply answer that since you can't this is type of work you prefer doing. However, if you wouldn't retire if you had the money then explain why. Work is an important element of happiness for most people and many won't retire even when they can.
Post Your Answer

3 :: How much are you willing to sacrifice to be successful at work As Numerical Control Programmer?

With anything comes sacrifice. The questions is how much of it are you willing to sacrifice with regards to work life balance, stress, etc?
Post Your Answer

4 :: What makes you right for this position?

This question can be tricky because you need to show your worth As Numerical Control Programmer without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.
Post Your Answer

5 :: Describe a time when you put your needs aside to help a co-worker understand a task. How did you assist them? What was the result?

The key is to show that the mentoring of a co-worker was first a higher priority than the task you had at hand (remember, you want to show that you focus on highest priority tasks first). Then, describe in detail how you helped them not only complete the task but learn to do it on their own. You want to teach them HOW to fish and not to simply fish for them.
Post Your Answer

6 :: Your client is upset with you for a mistake you made, how do you react?

Acknowledge their pain - empathize with them. Then apologize and offer a solution to fix the mistake.
Post Your Answer

7 :: Why was there a gap in your employment As Numerical Control Programmer?

If you were unemployed for a period of time, be direct and to the point about what you’ve been up to (and hopefully, that’s a litany of impressive volunteer and other mind-enriching activities, like blogging or taking classes). Then, steer the conversation toward how you will do the job and contribute to the organization: “I decided to take a break at the time, but today I’m ready to contribute to this organization in the following ways.”
Post Your Answer

8 :: Would you like doing repetitive work?

Why not, I am not only doing a repetitive work but also earning but also getting a good salary by the company As Numerical Control Programmer. And second thing is that nothing is interesting in the life till we are not interested.
Post Your Answer

9 :: How would your boss and co-workers describe you?

First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Numerical Control Programmer, such as your strong work ethic or your willingness to pitch in on other projects when needed.
Post Your Answer

10 :: How do you believe you would benefit our organization?

This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.
Post Your Answer

11 :: Give me a specific example of a time when you had to conform to a policy with which you did not agree?

You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.
Post Your Answer

12 :: Why do you want to leave your current company As Numerical Control Programmer?

Bad Answer: Complaining about or blaming their former job, boss or colleagues. Also, having no good reason.

Good answer: One that focuses on the positives about why the job they're applying for offers them better learning or career opportunities, chances for advancement, aligns more closely to their long term goals, or is a better fit for them.
Post Your Answer

13 :: Top 12 Best Brainteaser Interview Questions:

Brainteaser questions As Numerical Control Programmer have become popular for interviews in recent years, as word has gotten out that top tech companies such as Apple, Google, Microsoft and IBM have used this type of question at one time or another.

Companies like Google aren't using these questions so much any more, but many companies, are, and it may be good to prepare for them As Numerical Control Programmer. The key to these isn't so much getting the exact answer, as it is showing how you would come up with an answer.

Here's a sample of 12 of the best and most difficult.

1. How many street lights are there in New York City?

2. How many gas stations are there in the United States?

3. How many golf balls can fit in a school bus?

4. How much should you charge to wash all the windows in Seattle?

5. Why are manhole covers round?

6. How many times a day does a clock's hands overlap?

7. How would you test a calculator?

8. Describe the internet to someone who just woke up from a 30-year coma.

9. How much does the Starbucks in Times Square bring in, in annual revenue?

10. You are shrunk to the height of a nickel and thrown into a blender. Your mass is reduced so that your density is the same as usual. The blades start moving in 60 seconds. What do you do?

11. What is the air speed velocity of an unladen swallow? ;)

12. How many golf balls are there in Florida?
Post Your Answer

14 :: How do you stay organized?

By maintaining proper routine every day. Putting my strongest points with my weakness. High priority always comes first As Numerical Control Programmer.
Post Your Answer

15 :: If you were given more initiatives than you could handle, what would you do?

First prioritize the important activities that impact the business most. Then discuss the issue of having too many initiatives with the boss so that it can be offloaded. Work harder to get the initiatives done.
Post Your Answer

16 :: Can you explain why you changed career paths As Numerical Control Programmer?

Don't be thrown off by this question—just take a deep breath and explain to the hiring manager why you've made the career decisions As Numerical Control Programmer you have. More importantly, give a few examples of how your past experience is transferable to the new role. This doesn't have to be a direct connection; in fact, it's often more impressive when a candidate can make seemingly irrelevant experience seem very relevant to the role.
Post Your Answer

17 :: What have you learned from mistakes on the job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
Post Your Answer

18 :: Are you good at working in a team As Numerical Control Programmer?

Before you answer, consider how you best contribute to a team:

☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?
Post Your Answer

19 :: Explain yourself in one line?

When you respond, keep in mind the type of position you are interviewing for like Numerical Control Programmer based job, the company culture, and the work environment. Your answer should help show the interviewer why you’re a match for the job and for the company.
Sample answers are:
☛ I’m a people person. I really enjoy meeting and working with a lot of different people.
☛ I’m a perfectionist. I pay attention to all the details, and like to be sure that everything is just right.
☛ I’m a creative thinker. I like to explore alternative solutions to problems and have an open mind about what will work best.
☛ I’m efficient and highly organized. This enables me to be as productive as possible on the job.
☛ I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.
Post Your Answer

20 :: Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
Post Your Answer

21 :: How long do you want to work for us if we hire you?

Here being specific is probably not the best approach. You may consider responding, “I hope a very long time.” Or “As long as we're both happy with my performance.”
Post Your Answer

22 :: If the company you worked for was doing something unethical or illegal, what would you do?

Report it to the leaders within the company. True leaders understand business ethics are important to the company's longevity
Post Your Answer

23 :: What does success mean to you?

I am punctual, I always have excellent attendance on any job As Numerical Control Programmer, I have a keen eye for both large and small details, and I am always finding ways to improve a process and shorten the length of time it takes to complete a project.
Post Your Answer

24 :: Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
Post Your Answer

25 :: What are you passionate about?

Ask yourself - what are your core passions that you wake up excited to act on each and every day? Ask yourself what makes you happy or drives you - is it helping others? Is it making money? Is it creating something? Is it about changing the world? Etc.
Post Your Answer

26 :: If you have seven white socks and nine black socks in a drawer, how many socks do you have to pull out blindly in order to ensure that you have a matching pair?

if the first one is one color (say, white), and the second one is the other color (black), then the third one, no matter what the color, will make a matching pair. (Sometimes you're not supposed to think that hard.)
Post Your Answer

27 :: What qualities do you believe are important to have as a manager?

Great managers tend to empower their employees to be successful through strong coaching. They understand how to manage relationships - this is commonly referred to emotional intelligence. They have to be able to handle both client and staff situations that require them to be calm under pressure to clearly think of solutions to complex problems. Most importantly they must be able to articulate the vision to the team and inspire them to work together to collectively achieve that goal
Post Your Answer

28 :: What can you tell me about team work as part of the job As Numerical Control Programmer?

There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.
Post Your Answer

29 :: How do you stay up to date with industry?

Discuss how you stay up to date by reading industry specific sites, magazines, and Google / yahoo news. Also make sure you stay up to date by reading the current news on the company's website.
Post Your Answer

30 :: Where do you see yourself in five years As Numerical Control Programmer?

If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn’t necessarily a one-way ticket to your aspirations?
It’s OK to say that you’re not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
Post Your Answer
Add New Question