Machinist Linotype Apprentice Interview Preparation Guide
Download PDF
Add New Question

63 Machinist Linotype Apprentice Questions and Answers:

1 :: Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
Post Your Answer

2 :: What would your previous employer say is your greatest strength?

Be prepared for this question. If you have to sit and think about it it's going to appear as if you're not sure or that you've never identified your own value in the work place - not good. You don't have to have a complex response. Keep it simple and honest. For example, several possibilities could be Leadership, Problem solving ability, Initiative, Energy, Work ethic, Innovative, etc., etc.
Post Your Answer

3 :: What are your weaknesses for Machinist Linotype Apprentice position?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn’t make you appear overly critical and shows you can reflect on your own performance.
Post Your Answer

4 :: What are you looking for in a new position As Machinist Linotype Apprentice?

I’ve been honing my skills As Machinist Linotype Apprentice for a few years now and, first and foremost, I’m looking for a position where I can continue to exercise those skills. Ideally the same things that this position has to offer. Be specific.
Post Your Answer

5 :: What type of people do you not work well with?

Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.
Post Your Answer

6 :: What is your typical way of dealing with conflict? Give me an example?

First, find out what the root of the problem is. Second, determine the best steps to remediation with the best possible outcome. Third, take action to put remediation plans in place.
Post Your Answer

7 :: What are your greatest professional strengths As Machinist Linotype Apprentice?

When answering this question, we recommends being accurate (share your true strengths, not those you think the interviewer wants to hear); relevant (choose your strengths that are most targeted to this particular position As Machinist Linotype Apprentice); and specific (for example, instead of “people skills,” choose “persuasive communication” or “relationship building”). Then, follow up with an example of how you've demonstrated these traits in a professional setting.
Post Your Answer

8 :: Tell us about a suggestion you have made that has benefited an organization you've worked for?

This is another opportunity to show the interviewer what you're capable of so make sure to be prepared for this type of question. Have an example ready and make sure its an example of a suggestion you've made that was accepted and that have positive influence. If you can come up with an example that relates to the position you're applying for that would be even better.
Post Your Answer

9 :: How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.
Post Your Answer

10 :: Top 12 Best Brainteaser Interview Questions:

Brainteaser questions As Machinist Linotype Apprentice have become popular for interviews in recent years, as word has gotten out that top tech companies such as Apple, Google, Microsoft and IBM have used this type of question at one time or another.

Companies like Google aren't using these questions so much any more, but many companies, are, and it may be good to prepare for them As Machinist Linotype Apprentice. The key to these isn't so much getting the exact answer, as it is showing how you would come up with an answer.

Here's a sample of 12 of the best and most difficult.

1. How many street lights are there in New York City?

2. How many gas stations are there in the United States?

3. How many golf balls can fit in a school bus?

4. How much should you charge to wash all the windows in Seattle?

5. Why are manhole covers round?

6. How many times a day does a clock's hands overlap?

7. How would you test a calculator?

8. Describe the internet to someone who just woke up from a 30-year coma.

9. How much does the Starbucks in Times Square bring in, in annual revenue?

10. You are shrunk to the height of a nickel and thrown into a blender. Your mass is reduced so that your density is the same as usual. The blades start moving in 60 seconds. What do you do?

11. What is the air speed velocity of an unladen swallow? ;)

12. How many golf balls are there in Florida?
Post Your Answer

12 :: Why are you leaving last job?

Although this would seem like a simple question, it can easily become tricky. You shouldn’t mention salary being a factor at this point As Machinist Linotype Apprentice. If you’re currently employed, your response can focus on developing and expanding your career and even yourself. If you’re current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
Post Your Answer

13 :: Tell me about a time when you were forced to make an unpopular decision?

Not every decision is popular. In fact, almost every decision is bound to make someone unhappy at some point. The key is to demonstrate how it impacted others positively and why you chose it.
Post Your Answer

14 :: If you felt like you were hitting the proverbial "wall" and getting burned out, what would you do to re-energize yourself?

Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.
Post Your Answer

15 :: You notice there are too many non productive internal meetings being held, what do you do?

Reach out to your boss and let him know that first you value his leadership and organization but that you are being overwhelmed with the amount of non productive internal meetings.
Post Your Answer

16 :: Tell me about a problem that you’ve solved in a unique or unusual way. What was the outcome? Were you happy or satisfied with it?

In this question the interviewer is basically looking for a real life example of how you used creativity to solve a problem.
Post Your Answer

17 :: Give me a specific example of a time when you had to conform to a policy with which you did not agree?

You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.
Post Your Answer

18 :: What type of salary are you looking for?

This can be a very tricky question as the individual asking it is probably digging for something other than a simple answer to the question. We recommend that you don't immediately respond to the question directly. Instead, say something like, “That a difficult question. What is range for this position?” More often than not the interviewer will tell you. If the interviewer insists on direct answer you may want say that it depends on the details of the job - then give a wide salary range.
Post Your Answer

19 :: How do you stay organized?

By maintaining proper routine every day. Putting my strongest points with my weakness. High priority always comes first As Machinist Linotype Apprentice.
Post Your Answer

20 :: What critical component of this position As Machinist Linotype Apprentice makes the work challenging?

Heading information: This should include job title, pay grade or range, reporting relationship (by position, not individual), hours or shifts, and the likelihood of overtime or weekend work.
Summary objective of the job: List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees.
Qualifications: State the education, experience, training, and technical skills necessary for entry into this job.
Special demands: This should include any extraordinary conditions applicable to the job As Machinist Linotype Apprentice (for example, heavy lifting, exposure to temperature extremes, prolonged standing, or travel).
Job duties and responsibilities: Only two features of job responsibility are important: identifying tasks that comprise about 90 to 95 percent of the work done and listing tasks in order of the time consumed (or, sometimes, in order of importance).
Post Your Answer

21 :: If the company you worked for was doing something unethical or illegal, what would you do?

Report it to the leaders within the company. True leaders understand business ethics are important to the company's longevity
Post Your Answer

22 :: How have you shown yourself to be a leader?

Think about a time where you've rallied a group of people around a cause / idea / initiative and successfully implemented it. It could be a small or large project but the key is you want to demonstrate how you were able to lead others to work for a common cause.
Post Your Answer

23 :: What types of books or magazines do you typically read?

Describe both your personal and professional favorites. If you happen to like professional books / magazines that relate to the industry of the company you're applying for - that's definitely worth highlighting.
Post Your Answer

24 :: Why should I hire you As Machinist Linotype Apprentice?

To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn’t ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.
Post Your Answer

25 :: What are you passionate about?

Ask yourself - what are your core passions that you wake up excited to act on each and every day? Ask yourself what makes you happy or drives you - is it helping others? Is it making money? Is it creating something? Is it about changing the world? Etc.
Post Your Answer

26 :: If you were an animal, which one would you want to be?

Seemingly random personality-test type questions like these come up in interviews generally because hiring managers want to see how you can think on your feet. There's no wrong answer here, but you'll immediately gain bonus points if your answer helps you share your strengths or personality or connect with the hiring manager. Pro tip: Come up with a stalling tactic to buy yourself some thinking time, such as saying, “Now, that is a great question. I think I would have to say… ”
Post Your Answer

27 :: Describe your academic achievements?

Think of a time where you really stood out and shined within college. It could be a leadership role in a project, it could be your great grades that demonstrate your intelligence and discipline, it could be the fact that you double majored. Where have you shined?
Post Your Answer

28 :: Where do you see yourself in five years As Machinist Linotype Apprentice?

If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn’t necessarily a one-way ticket to your aspirations?
It’s OK to say that you’re not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
Post Your Answer

29 :: Suppose there are three light switches outside a room. Inside is a single light bulb, controlled by one of the three switches. You need to determine which switch operates the bulb. You can turn the switches on and off as many times as you wish (they are all off to begin with), but may only enter the room once. There is no one there to help you. The door to the room is closed, and there are no windows, so you cannot see inside. How can you discover which switch operates the bulb?

Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
Post Your Answer

30 :: How long do you envision yourself staying with this company?

Understand that companies invest a lot of money into hiring the right staff. You want to emphasize that you are in it for the long run and you want to develop a career there and that it's not just a "5 month stepping stone" type of a job. You should be thinking how you're going to grow with that company. After all, don't you want to invest your energy and time with a company that is going to continue to be successful and one that will help you grow?
Post Your Answer
Add New Question