Injection Molding Process Operator Plastic Interview Preparation Guide
Download PDF
Add New Question

67 Injection Molding Process Operator Plastic Questions and Answers:

1 :: Tell me about the most fun you have had on the job?

When answering this question, discuss situations where you completed tasks benefitting your previous employers.
Post Your Answer

2 :: How do you think your colleagues at your last job would describe you?

While your CV will say a lot about your work history As Injection Molding Process Operator Plastic, the interviewer will most likely look for greater detail with questions such as this. Be positive about previous experience, highlighting your own strengths.
Post Your Answer

3 :: Where do you see yourself in five years? Ten years?

Bad Answer: A generic or uninspired answer. Also, answers that show that this career/company is just a temporary stop for them.

Good answer: One that shows the candidate has thought about this question, has plans, and that those plans align with the job and a career path that is possible in the company. You want to see that this candidate is a good long term investment.
Post Your Answer

4 :: What is your dream job?

There is almost no good answer to this question, so don't be specific. If you tell the interviewer that the job you're applying for with his/her company is the perfect job you may loose credibility if you don't sound believable (which you probably won't if you're not telling the truth.) If you give the interviewer some other job the interviewer may get concerned that you'll get dissatisfied with the position if you're hired. Again, don't be specific. A good response could be, “A job where my work ethic and abilities are recognized and I can make a meaningful difference to the organization.”
Post Your Answer

5 :: What critical component of this position As Injection Molding Process Operator Plastic makes the work challenging?

Heading information: This should include job title, pay grade or range, reporting relationship (by position, not individual), hours or shifts, and the likelihood of overtime or weekend work.
Summary objective of the job: List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees.
Qualifications: State the education, experience, training, and technical skills necessary for entry into this job.
Special demands: This should include any extraordinary conditions applicable to the job As Injection Molding Process Operator Plastic (for example, heavy lifting, exposure to temperature extremes, prolonged standing, or travel).
Job duties and responsibilities: Only two features of job responsibility are important: identifying tasks that comprise about 90 to 95 percent of the work done and listing tasks in order of the time consumed (or, sometimes, in order of importance).
Post Your Answer

6 :: How do you stay organized?

By maintaining proper routine every day. Putting my strongest points with my weakness. High priority always comes first As Injection Molding Process Operator Plastic.
Post Your Answer

7 :: Why did you leave your last job As Injection Molding Process Operator Plastic?

Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.
Post Your Answer

8 :: What motivates you at the work place?

Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.
Post Your Answer

9 :: Can you describe your ideal boss/supervisor?

During the interview As Injection Molding Process Operator Plastic process employers will want to find out how you respond to supervision. They want to know whether you have any problems with authority, If you can work well as part of a group (see previous question) and if you take instructions well etc.
Never ever ever, criticize a past supervisor or boss. This is a red flag for airlines and your prospective employer will likely assume you are a difficult employee, unable to work in a team or take intruction and side with your former employer.
Post Your Answer

10 :: What qualities do you look for in a boss?

Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.
Post Your Answer

11 :: What's your management style?

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.
Post Your Answer

12 :: How do you handle confidentiality in your work?

Often, interviewers will ask questions to find out the level of technical knowledge As Injection Molding Process Operator Plastic that a candidate has concerning the duties of a care assistant. In a question such as this, there is an opportunity to demonstrate professional knowledge and awareness. The confidentiality of a person’s medical records is an important factor for a care assistant to bear in mind.
Post Your Answer

13 :: When were you most satisfied in your job As Injection Molding Process Operator Plastic?

I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.
Post Your Answer

14 :: Do you know anyone that works with our company?

Sometimes companies have policies relating to the hiring of individuals related to current company employees. If you are related to anyone working for the company make sure you're aware of company policies before you enter the interview. If you have a friend or acquaintance working for the company make sure have good relationship with this individual before mentioning them.
Post Your Answer

15 :: Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
Post Your Answer

16 :: Top 12 Best Brainteaser Interview Questions:

Brainteaser questions As Injection Molding Process Operator Plastic have become popular for interviews in recent years, as word has gotten out that top tech companies such as Apple, Google, Microsoft and IBM have used this type of question at one time or another.

Companies like Google aren't using these questions so much any more, but many companies, are, and it may be good to prepare for them As Injection Molding Process Operator Plastic. The key to these isn't so much getting the exact answer, as it is showing how you would come up with an answer.

Here's a sample of 12 of the best and most difficult.

1. How many street lights are there in New York City?

2. How many gas stations are there in the United States?

3. How many golf balls can fit in a school bus?

4. How much should you charge to wash all the windows in Seattle?

5. Why are manhole covers round?

6. How many times a day does a clock's hands overlap?

7. How would you test a calculator?

8. Describe the internet to someone who just woke up from a 30-year coma.

9. How much does the Starbucks in Times Square bring in, in annual revenue?

10. You are shrunk to the height of a nickel and thrown into a blender. Your mass is reduced so that your density is the same as usual. The blades start moving in 60 seconds. What do you do?

11. What is the air speed velocity of an unladen swallow? ;)

12. How many golf balls are there in Florida?
Post Your Answer

17 :: What type of people do you not work well with?

Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.
Post Your Answer

18 :: How do you believe you would benefit our organization?

This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.
Post Your Answer

19 :: Explain yourself in one line?

When you respond, keep in mind the type of position you are interviewing for like Injection Molding Process Operator Plastic based job, the company culture, and the work environment. Your answer should help show the interviewer why you’re a match for the job and for the company.
Sample answers are:
☛ I’m a people person. I really enjoy meeting and working with a lot of different people.
☛ I’m a perfectionist. I pay attention to all the details, and like to be sure that everything is just right.
☛ I’m a creative thinker. I like to explore alternative solutions to problems and have an open mind about what will work best.
☛ I’m efficient and highly organized. This enables me to be as productive as possible on the job.
☛ I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.
Post Your Answer

20 :: Tell me about a time when you successfully handled a situation?

For this question, the interviewer wants to know what you do in a situation that doesn’t have a clear answer. This will help the interviewer know how you respond to unforeseen challenges.
Post Your Answer

21 :: Explain what are your weaknesses As Injection Molding Process Operator Plastic?

Red flags: This is the peanut butter to the previous question’s jelly. Again, everyone should expect it, so it's a bad sign if someone seems totally unprepared, or gives a stock answer like, "I'm a perfectionist." Also, of course, candidates crazy enough to blurt out some horrible personality trait should go in the red flagged pile.

Good answer: Candidates should talk about a real weakness they've been working on improving. For instance, they're not good at public speaking, but they've been taking a course to help them improve. Or maybe they feel that they're easily distracted when working online, but have installed software that helps them stay on task. Answers like these show a desire for improvement, self awareness and discipline.
Post Your Answer

22 :: How long do you want to work for us if we hire you?

Here being specific is probably not the best approach. You may consider responding, “I hope a very long time.” Or “As long as we're both happy with my performance.”
Post Your Answer

23 :: Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
Post Your Answer

24 :: How would you describe your approach to Injection Molding Process Operator Plastic?

In more general terms, a question such as this gives a candidate the opportunity to talk about their professional philosophy and skills. While the question is general in nature, the best answers are usually quite specific, picking one or two points and exemplifying them with instances from personal history.
Post Your Answer

25 :: How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?

Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn’t necessarily want an exact number—he wants to make sure that you understand what’s being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it’s OK to ask for a pen and paper!)
Post Your Answer

26 :: How do you deal with pressure or stressful situations?

Choose an answer that shows that you can meet a stressful situation head-on in a productive, positive manner and let nothing stop you from accomplishing your goals. A great approach is to talk through your go-to stress-reduction tactics (making the world's greatest to-do list, stopping to take 10 deep breaths), and then share an example of a stressful situation you navigated with ease.
Post Your Answer

27 :: How well do you know this industry?

Two things businesses need to pay attention to in their industries are what their competition is doing and the customers. You may not always agree with your competitors but it is important to be aware of what changes they are making. Very well. I have been in the industry for over 6 years.
Post Your Answer

28 :: Why should I hire you As Injection Molding Process Operator Plastic?

To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn’t ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.
Post Your Answer

29 :: Where do you see yourself in five years As Injection Molding Process Operator Plastic?

If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn’t necessarily a one-way ticket to your aspirations?
It’s OK to say that you’re not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
Post Your Answer

30 :: If you were an animal, which one would you want to be?

Seemingly random personality-test type questions like these come up in interviews generally because hiring managers want to see how you can think on your feet. There's no wrong answer here, but you'll immediately gain bonus points if your answer helps you share your strengths or personality or connect with the hiring manager. Pro tip: Come up with a stalling tactic to buy yourself some thinking time, such as saying, “Now, that is a great question. I think I would have to say… ”
Post Your Answer
Add New Question