Automatic Spinning Lathe Operator Interview Preparation Guide
Download PDF
Add New Question

67 Automatic Spinning Lathe Operator Questions and Answers:

1 :: Top 11 Questions to Verify Experience and Credentials As Automatic Spinning Lathe Operator:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?
Post Your Answer

2 :: Explain what are your weaknesses As Automatic Spinning Lathe Operator?

Red flags: This is the peanut butter to the previous question’s jelly. Again, everyone should expect it, so it's a bad sign if someone seems totally unprepared, or gives a stock answer like, "I'm a perfectionist." Also, of course, candidates crazy enough to blurt out some horrible personality trait should go in the red flagged pile.

Good answer: Candidates should talk about a real weakness they've been working on improving. For instance, they're not good at public speaking, but they've been taking a course to help them improve. Or maybe they feel that they're easily distracted when working online, but have installed software that helps them stay on task. Answers like these show a desire for improvement, self awareness and discipline.
Post Your Answer

3 :: Give me a specific example of a time when you had to conform to a policy with which you did not agree?

You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.
Post Your Answer

4 :: What are your weaknesses for Automatic Spinning Lathe Operator position?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn’t make you appear overly critical and shows you can reflect on your own performance.
Post Your Answer

5 :: How do you propose to compensate for your lack of experience?

The first thing you should do is discuss experience you have the interviewer is unfamiliar with. Once that is detailed, tell the person conducting the interview that you are able to learn new tasks and information in a reasonable period of time and possess a strong work ethic. However, only state this if you can live up to these expectations.
Post Your Answer

6 :: How do you evaluate success As Automatic Spinning Lathe Operator?

I evaluate success As Automatic Spinning Lathe Operator in different ways. At work, it is meeting the goals set by my supervisors and my fellow workers. It is my understanding, from talking to other employees, that the Global Guideline company is recognized for not only rewarding success but giving employees opportunity to grow as well.
Post Your Answer

7 :: Can you tell me a little about yourself?

This question seems simple, so many people fail to prepare for it, but it's crucial. Here's the deal: Don't give your complete employment (or personal) history As Automatic Spinning Lathe Operator. Instead give a pitch—one that’s concise and compelling and that shows exactly why you’re the right fit for the job. Start off with the 2-3 specific accomplishments or experiences that you most want the interviewer to know about, then wrap up talking about how that prior experience has positioned you for this specific role.
Post Your Answer

8 :: What position do you prefer on a team working on a project?

Do not claim to be comfortable with a specific role if you in are in fact not comfortable with it. However, if you have no problem working in certain roles or situations, be sure to discuss this with the interviewer.
Post Your Answer

9 :: What is your dream job?

There is almost no good answer to this question, so don't be specific. If you tell the interviewer that the job you're applying for with his/her company is the perfect job you may loose credibility if you don't sound believable (which you probably won't if you're not telling the truth.) If you give the interviewer some other job the interviewer may get concerned that you'll get dissatisfied with the position if you're hired. Again, don't be specific. A good response could be, “A job where my work ethic and abilities are recognized and I can make a meaningful difference to the organization.”
Post Your Answer

10 :: What has been your biggest professional disappointment?

When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.
Post Your Answer

11 :: If you were hiring a person for this job As Automatic Spinning Lathe Operator, what would you look for?

Discuss qualities you possess required to successfully complete the job duties.
Post Your Answer

12 :: Are you currently looking at other job opportunities?

Just answer this question honestly. Sometime an employer wants to know if there are other companies you're considering so that they can determine how serious you are about the industry, they're company and find out if you're in demand. Don't spend a lot of time on this question; just try to stay focused on the job you're interviewing for.
Post Your Answer

13 :: Explain me about a problem or disagreement you had with previous supervisor?

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.
Post Your Answer

14 :: Tell me about a time when you had to make a decision without all the information you needed. How did you handle it As Automatic Spinning Lathe Operator? Why? Were you happy with the outcome?

In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.
Post Your Answer

15 :: What type of salary are you looking for?

This can be a very tricky question as the individual asking it is probably digging for something other than a simple answer to the question. We recommend that you don't immediately respond to the question directly. Instead, say something like, “That a difficult question. What is range for this position?” More often than not the interviewer will tell you. If the interviewer insists on direct answer you may want say that it depends on the details of the job - then give a wide salary range.
Post Your Answer

16 :: Tell me about a time when you helped resolve a dispute between others?

Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
Post Your Answer

17 :: How would your boss and co-workers describe you?

First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Automatic Spinning Lathe Operator, such as your strong work ethic or your willingness to pitch in on other projects when needed.
Post Your Answer

18 :: Tell me about a problem that you’ve solved in a unique or unusual way. What was the outcome? Were you happy or satisfied with it?

In this question the interviewer is basically looking for a real life example of how you used creativity to solve a problem.
Post Your Answer

19 :: How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.
Post Your Answer

20 :: Top 12 Stress Based Interview Questions As Automatic Spinning Lathe Operator:

Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.

There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.

1. How do you feel this interview is going As Automatic Spinning Lathe Operator?

2. How would you handle undeserved criticism from a superior?

3. How many other jobs are you applying for?

4. What would you do if you saw a colleague stealing supplies or equipment?

5. What did you do when you had a boss you didn’t get along with?

6. What would you do if a colleague took credit for your idea, and got a promotion?

7. Was the stress of your previous job too much for you?

8. What would you do if a colleague admitted to lying on their resume to get the job?

9. What would you do if a customer verbally insulted you in front of co-workers?

10. What would you change about the design of a baseball hat?

11. Why were you fired from your previous job As Automatic Spinning Lathe Operator?

12. How successful do you think you've been so far?
Post Your Answer

21 :: Tell me about a time when you had to give someone difficult feedback As Automatic Spinning Lathe Operator?

By asking this question, your interviewer hopes to learn whether you can communicate effectively, address issues in the workplace and motivate others during difficult times. Giving negative feedback requires honesty, thoughtfulness and tact. Answering this question well can help show an interviewer that you would be a good fit for a managerial position or a position that involves working closely with others.
Post Your Answer

22 :: If you had enough money to retire would you?

Just be honest. If you would retire then say so. But since you can't retire, and the interviewer already knows this, simply answer that since you can't this is type of work you prefer doing. However, if you wouldn't retire if you had the money then explain why. Work is an important element of happiness for most people and many won't retire even when they can.
Post Your Answer

23 :: How do you deal with conflict in the workplace As Automatic Spinning Lathe Operator?

When people work together, conflict is often unavoidable because of differences in work goals and personal styles. Follow these guidelines for handling conflict in the workplace.

☛ 1. Talk with the other person.
☛ 2. Focus on behavior and events, not on personalities.
☛ 3. Listen carefully.
☛ 4. Identify points of agreement and disagreement.
☛ 5. Prioritize the areas of conflict.
☛ 6. Develop a plan to work on each conflict.
☛ 7. Follow through on your plan.
☛ 8. Build on your success.
Post Your Answer

24 :: Why do you want to work in this industry As Automatic Spinning Lathe Operator?

Make sure you research the industry first. Then find at least 3 core things about that industry that you're passionate about (for example: how their solutions impact clients, their culture, the leadership, etc)
Post Your Answer

25 :: Why are you the best fit for this job As Automatic Spinning Lathe Operator?

Analyze the job responsibilities and match those to your skills sets. Then discuss how your experience and skills sets can truly create the best impact to the company in that specific job role. Impact could mean marketing impressions, sales, cutting costs, making products more efficiently, creating better customer service, engineering new designs that create customer excitement, etc.
Post Your Answer

26 :: What have you done to reduce costs, increase revenue, or save time?

Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.
Post Your Answer

27 :: What other companies are you interviewing at?

Be open and share if you are indeed interviewing elsewhere, but do it in a humble way. This way you don't seem arrogant and the interviewer knows your skills are valued by other companies. This also tends to make them want you more as they know they are competing for your services.
Post Your Answer

28 :: How do you handle conflicts with people you supervise?

At first place, you try to avoid conflicts if you can. But once it happens and there’s no way to avoid it, you try to understand the point of view of the other person and find the solution good for everyone. But you always keep the authority of your position.
Post Your Answer

29 :: What motivates you to work As Automatic Spinning Lathe Operator?

Describe what makes you passionate about the work. It could be the company's vision, the product, your desire to succeed, the clients, your peers and so on. They key is to first understand what internally motivates you to do your job and then to emphasize that in a positive way
Post Your Answer

30 :: What other companies are you interviewing with?

Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'
Post Your Answer
Add New Question