Autodesk Interview Preparation Guide

Download PDF

No matter your previous job experience or educational background, be sure to tell the interviewer you have the knowledge and skills to successfully execute the job responsibilities.

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.

With anything comes sacrifice. The questions is how much of it are you willing to sacrifice with regards to work life balance, stress, etc?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn’t make you appear overly critical and shows you can reflect on your own performance.

Try to include improvement activities that relate to the job In Autodesk. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.

This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.

I've always been motivated by the challenge – in my last role, I was responsible for training our new recruits and having a 100% success rate in passing scores. I know that this job is very fast-paced and I'm more than up for the challenge. In fact, I thrive on it.

Situational interviews In Autodesk are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.

The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.


1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?

2. How you would handle it if your team resisted a new idea or policy you introduced?

3. How would you handle it if the priorities for a project you were working on were suddenly changed?

4. What would you do if the work of an employee you managed didn't meet expectations?

5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?

6. What steps would you take to make an important decision on the job In Autodesk?

7. How would you handle a colleague you were unable to form a positive relationship with?

8. What would you do if you disagreed with the way a manager wanted you to handle a problem?

9. What would you do if you were assigned to work with a difficult client In Autodesk?

10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?

11. How would you handle working closely with a colleague who was very different from you?

12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?

13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?

Emotional intelligence, or EQ, has come into vogue as a good trait to hire for.

EQ is the ability to use emotional information to guide thinking and behavior, to recognize other people's emotions and your own, and to discriminate between different feelings and label them appropriately.

EQ is considered essential to help teams function well. Here are some of the top questions for help you get an idea of how candidates perceive their emotions and those of others.

1. If you started a company today, what would its top values be?

2. Who inspires you? Why?

3. How could you create more balance in your life?

4. What makes you angry?

5. How do you have fun?

6. How good are you at asking for help?

7. How did you deal with a bad day?

8. What's something you're really proud of? Why?

9. Tell me about a time when your mood altered your performance (positively or negatively).

10. Has there ever been a time when you felt you needed to change your behavior at work? How did you do it?

11. Did you create friendships that lasted while working at a previous job?

It depends on the role - but the better way to answer this is to ask the interviewer what their expectations are with regards to what the role can expense and then simply state that you'll stay within those parameters

While discussing this, be sure to stress specific examples of what you bring to the company. Good qualities include resolve to fulfill job responsibilities, optimism, and a desire to be as efficient as possible while at work.

Be proud of your achievement, discuss the results, and explain why you feel most proud of this one. Was it the extra work? Was it the leadership you exhibited? Was it the impact it had?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

For most jobs, communication skills In Autodesk are important. It's hard to work as a team if people aren't communicating well.

At some jobs, like customer service or sales, communication skills are an absolute essential.

These questions are meant to help gauge a candidate's ability to communicate.

1. How do you prefer to build rapport with others?

2. How would you go about simplifying a complex issue in order to explain it to a client or colleague?

3. How would you go about persuading someone to see things your way at work?

4. How would you go about explaining a complex idea/problem to a client who was already frustrated?

5. What would you do if you there was a breakdown in communication at work?

6. Talk about a successful presentation you gave and why you think it did well.

7. How would you explain a complicated technical problem to a colleague with less technical understanding?

8. Do you prefer written or verbal communication In Autodesk?

9. Describe a time when you had to be careful talking about sensitive information. How did you do it?

10. What would you do if you misunderstood an important communication on the job?

11. Talk about a time when you made a point that you knew your colleagues would be resistant to.

12. Is it more important to be a good listener or a good communicator In Autodesk?

13. Tell me about a time you had to relay bad news to a client or colleague.

14. Rate your communication skills on a scale of 1 to 10. Give examples of experiences that demonstrate the rating is accurate.

15. How have you handled working under someone you felt was not good at communicating?

This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job In Autodesk where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

The employer would want to know that not only you can do the job but you can make the difference and bring significant contribution – Simple as that.
No doubt that this is your time to perform and present yourself – You have to introduce/sell yourself to the interviewer. Prepare your answer based on your qualification, professional experience and what you’ve already achieved in your previous jobs. This is your time to express why you think that your professional abilities fit into the job and its requirements.

Top 10 employment experience you’d want to review:
☛ Companies you worked for with dates
☛ The positions you’ve held
☛ Key projects and responsibilities
☛ Achievements
☛ Coursework & continues education
☛ Expertise
☛ Tools you used (software, hardware)
☛ Knowledge of languages
☛ Engagement with customers and key industry leaders
☛ Team work you were involved (and your contribution)

You'll want to be prepare with some very specific examples of what you've done over the last year and what you're currently doing to improve your professional knowledge and skill set as well as anything else you're doing the shows self improvement.

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.

I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.

Bad Answer: A generic or uninspired answer. Also, answers that show that this career/company is just a temporary stop for them.

Good answer: One that shows the candidate has thought about this question, has plans, and that those plans align with the job and a career path that is possible in the company. You want to see that this candidate is a good long term investment.

Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work In Autodesk on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.

I would explain and show to him or her best way possible and if they have a better way then I will encourage him or her to let me know then we can see if it works or not In Autodesk.

When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.

Red flags: This is the peanut butter to the previous question’s jelly. Again, everyone should expect it, so it's a bad sign if someone seems totally unprepared, or gives a stock answer like, "I'm a perfectionist." Also, of course, candidates crazy enough to blurt out some horrible personality trait should go in the red flagged pile.

Good answer: Candidates should talk about a real weakness they've been working on improving. For instance, they're not good at public speaking, but they've been taking a course to help them improve. Or maybe they feel that they're easily distracted when working online, but have installed software that helps them stay on task. Answers like these show a desire for improvement, self awareness and discipline.

When I was in college, I took an art class to supplement my curriculum. I didn't take it very seriously, and assumed that, compared to my Engineering classes, it would be a walk in the park. My failing grades at midterm showed me otherwise. I'd even jeopardized my scholarship status. I knew I had to get my act together. I spent the rest of the semester making up for it, ended up getting a decent grade in the class. I learned that no matter what I'm doing, I should strive to do it to the best of my ability. Otherwise, it's not worth doing at all.

Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'

Discuss how you stay up to date by reading industry specific sites, magazines, and Google / yahoo news. Also make sure you stay up to date by reading the current news on the company's website.

Answer this as positively as possible and try to avoid disparaging the company you had previously worked for. The key is to accept the fact that yes, you were fired, but you've learned from the mistakes that got you there and you're better now because of it. If you haven't been fired, well, then this question's a piece of cake isn't it?