Service Technician Computerized Photofinishing Equ Interview Preparation Guide
Download PDF

78 Service Technician Computerized Photofinishing Equ Questions and Answers:

1 :: What would your previous employer say is your greatest strength?

Be prepared for this question. If you have to sit and think about it it's going to appear as if you're not sure or that you've never identified your own value in the work place - not good. You don't have to have a complex response. Keep it simple and honest. For example, several possibilities could be Leadership, Problem solving ability, Initiative, Energy, Work ethic, Innovative, etc., etc.

2 :: Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.

3 :: Explain yourself in one line?

When you respond, keep in mind the type of position you are interviewing for like Service Technician Computerized Photofinishing Equ based job, the company culture, and the work environment. Your answer should help show the interviewer why you’re a match for the job and for the company.
Sample answers are:
☛ I’m a people person. I really enjoy meeting and working with a lot of different people.
☛ I’m a perfectionist. I pay attention to all the details, and like to be sure that everything is just right.
☛ I’m a creative thinker. I like to explore alternative solutions to problems and have an open mind about what will work best.
☛ I’m efficient and highly organized. This enables me to be as productive as possible on the job.
☛ I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.

4 :: Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

5 :: Are you able to relocate if required?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

6 :: Can you explain why you changed career paths As Service Technician Computerized Photofinishing Equ?

Don't be thrown off by this question—just take a deep breath and explain to the hiring manager why you've made the career decisions As Service Technician Computerized Photofinishing Equ you have. More importantly, give a few examples of how your past experience is transferable to the new role. This doesn't have to be a direct connection; in fact, it's often more impressive when a candidate can make seemingly irrelevant experience seem very relevant to the role.

7 :: What are your strengths As Service Technician Computerized Photofinishing Equ?

This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job As Service Technician Computerized Photofinishing Equ where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.

8 :: How do you believe you would benefit our organization?

This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.

9 :: What can you offer us that someone else can not?

Bad Answer: Going negative - if the candidate starts trash talking other candidates, it's a sure sign of a bad attitude. Also, if they can't provide a solid answer, it may show that they lack thorough knowledge of the skills the job requires, and an understanding of where they fit in.

Good answer: The candidate can name specific skills, abilities or understandings they have that apply directly to the job that other candidates are unlikely to have, or are in short supply.

10 :: What type of salary are you looking for?

This can be a very tricky question as the individual asking it is probably digging for something other than a simple answer to the question. We recommend that you don't immediately respond to the question directly. Instead, say something like, “That a difficult question. What is range for this position?” More often than not the interviewer will tell you. If the interviewer insists on direct answer you may want say that it depends on the details of the job - then give a wide salary range.

11 :: Tell us something about yourself?

Bad Answer: Candidates who ramble on about themselves without regard for information that will actually help the interviewer make a decision, or candidates who actually provide information showing they are unfit for the job.

Good answer: An answer that gives the interviewer a glimpse of the candidate's personality, without veering away from providing information that relates to the job. Answers should be positive, and not generic.

12 :: What has been your biggest professional disappointment?

When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.

13 :: What is your biggest weakness As Service Technician Computerized Photofinishing Equ?

No one likes to answer this question because it requires a very delicate balance. You simply can’t lie and say you don’t have one; you can’t trick the interviewer by offering up a personal weakness As Service Technician Computerized Photofinishing Equ that is really a strength (“Sometimes, I work too much and don’t maintain a work-life balance.”); and you shouldn’t be so honest that you throw yourself under the bus (“I’m not a morning person so I’m working on getting to the office on time.”)

14 :: How did you handle meeting a tight deadline As Service Technician Computerized Photofinishing Equ?

Review every deadline you need to meet. Prioritize your projects by deadline and factor in how important each project is. Record your deadlines on a digital calendar or spreadsheet.

15 :: What have you learned from mistakes on this job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

16 :: How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.

17 :: What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

18 :: What have you done to improve your knowledge As Service Technician Computerized Photofinishing Equ in the last year?

Try to include improvement activities that relate to the job As Service Technician Computerized Photofinishing Equ. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.

19 :: What's your management style?

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.

20 :: How do you think your colleagues at your last job would describe you?

While your CV will say a lot about your work history As Service Technician Computerized Photofinishing Equ, the interviewer will most likely look for greater detail with questions such as this. Be positive about previous experience, highlighting your own strengths.

21 :: Do you work well within a team?

Some people are thrown when they are asked this Service Technician Computerized Photofinishing Equ question when they are applying for a position to work alone. Every company works as a team, so you are a good team player, give an example of when you have worked well within a team.

22 :: Can you describe your ideal boss/supervisor?

During the interview As Service Technician Computerized Photofinishing Equ process employers will want to find out how you respond to supervision. They want to know whether you have any problems with authority, If you can work well as part of a group (see previous question) and if you take instructions well etc.
Never ever ever, criticize a past supervisor or boss. This is a red flag for airlines and your prospective employer will likely assume you are a difficult employee, unable to work in a team or take intruction and side with your former employer.

23 :: How do you measure success?

There may be several good answers. Some include: you're able to set realistic, yet aggressive goals that push you and you're able to achieve them, you go the extra mile on all projects, client satisfaction is high, your boss is elated at your performance on all projects, etc.

24 :: Tell me about a time when you helped resolve a dispute between others?

Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.

25 :: Explain me about a problem or disagreement you had with previous supervisor?

This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.

26 :: Would you like doing repetitive work?

Why not, I am not only doing a repetitive work but also earning but also getting a good salary by the company As Service Technician Computerized Photofinishing Equ. And second thing is that nothing is interesting in the life till we are not interested.

27 :: What is it about this position As Service Technician Computerized Photofinishing Equ that attracts you the most?

Use your knowledge of the job description to demonstrate how you are a suitable match for the role.

28 :: Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.

29 :: Do you like being around people?

People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As Service Technician Computerized Photofinishing Equ.

30 :: Do you work well on a team? How would you define teamwork?

I would define team work as getting the job done As Service Technician Computerized Photofinishing Equ whether that means if I have to do more then the guy next to me as long as the work gets finished.